![]() Two further CFast memory card modules (CX2550-0010) can be connected between the power supply unit and the CPU, so that a total of up to three CFast cards can be used. The power supply for the CPU module comes from a CX2100-0014 or CX2100-0914 power supply module, which is connected on the right-hand side of the CPU. ![]() Internally the modules are connected via PCI Express and can be connected subsequently to the CPU in the field. Up to four modules can be connected to the basic CPU module. Due to its high-performance the CX2040 can be used for interpolating 3-D path movements with TwinCAT NC I. TwinCAT automation software transforms a CX2040 system into a powerful PLC andmotion control system that can be operated with or without visualization. The operating system is Microsoft Windows Embedded Compact 7, Windows Embedded Standard 7 P or Windows 10 IoT Enterprise 2016 LTSB. Other components from the CX2000 family can be connected via the multi-pin terminals on either side. The unit can optionally be ordered with a fieldbus or serial interface. The CPU has a 128 kB NOVRAM persistent data memory for situations where no UPS is used. The basic configuration of the CX2040 includes a CFast memory card, two independent Gbit Ethernet interfaces, four USB 2.0 interfaces and a DVI-I interface. The controller boots from the CFast flash memory card. In addition to the CPU and chipset the CX2040 also contains the main memory with 4 GB RAM as standard. Due to its high power the CPU is equipped with a fan with ball bearings and speed monitoring. The CX2040 has a 2.1 GHz Intel ® Core™ i7 quad-core CPU.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |